User guide
Circle Communication Products, Inc
2.4G Cordless Telephone System - Handheld Extension (WHE ER) user guide
Page 19
Call Hold
3
)
0
1
-
0
1
1
2
:
0
0
A
M
Caller ID no.
T
A
L
K
-
1
0
2
:
2
8
V
1
H
O
L
D
R
E
C
T
X
V
M
Description:
You can use Call Hold to put a call on hold temporary. The
held party will hear music during holding period.
Activation:
1. During conversation, press soft key HOLD .
2. You will hear a dial tone.
3. a. To call third party, dial the number you w
ant to call or b.
to answer another incoming line that is ringing at another
extension, press the soft key PICK.
4. Switch between two parties by press the soft key HOLD .
5. If you want to drop the party on line and return to the
party on hold, you can hang up.
Your telephone rings, you
lift up handset to resume conversation with the party on
hold.
Result: The held line icon is flash.
Condition: If a call on hold is not retrieved in a specified period, the
system will automatically recall the extension user.
Call Hold, Exclusive
3 ) 0 1 - 0 1 1 2 : 0 0 A M
Caller ID no.
T
A
L
K
-
1
0
2
:
2
8
V
1
C
O
N
F
Description:
You can use the soft key CONF to put a call on exclusive hold
condition. The held party will hear music d
uring holding
period. The call can only be picked up again at the same
extension. When time out occurs, the exclusive hold condition
will change to common hold condition and can be picked up at
any extension.
Activation:
During conversation, press soft key CONF .
Result: The held line icon is flash.
Condition:
If a call on hold is not retrieved in a specified period, the
system will automatically recall the extension user.
Call Paging
0 ) 0 1 - 0 1 1 2 : 0 0 A M
User Name
P
A
G
E
Description:
Paging allows you to make a voice announcement through a
PA system via the Audio Out port of the main control base.
Activation: 1. Press the soft key “PAGE” in idle mode.
2. ‘PAGING’ will appear on the LCD
3. Make a voice announcement.
4. Press END key when finish the announcement
Result: The LCD will show ‘Paging’ acknowledgement.
Condition
It is optional. To connection the Audio Out Port to a PA system
use an audio cable with a 3.5mm plug.