User guide
Circle Communication Products, Inc
2.4G Cordless Telephone System - Handheld Extension (WHE ER) user guide
Page 18
8. Feature Operation
Auto Attendance
0 ) 0 1 - 0 1 1 2 : 0 0 A M
User Name
P
I
C
K
D
N
D
A
A
Description:
This feature is useful to back up an operator to receive an
incoming call. When the operator is not available, incoming
calls will be forwarded to the voice mail system. The outside
caller can p
ress the extension number of a desired extension
or leave a message in extension “0” after a beep tone.
Activation:
Press the soft key AA in idle mode
Result:
LCD will acknowledge
the setting.
0 ) 0 1 - 0 1 1 2 : 0 0 A M
F o r w a r d N / A
V
M
P
I
C
K
D
N
D
A
A
Deactivation:
Press the soft key AA
again and the extension return to normal
mode
Condition Extension 0 is default as the system operator.
This feature should be activated a
nd deactivated at extension
‘0’ for the system.
When the called extension is not set to call forward to voice
mail, the outside caller will leave message in extension “0”.
Call Forward
3
)
0
1
-
0
1
1
2
:
0
0
A
M
F
o
r
w
a
r
d
B
u
s
y
/
N
A
V
M
L 1 L 2 L 3
Description:
Call forwarding feature enable you to have calls forwarded to
a specified destination. You may specify the circumstances
under which your calls are forwarded.
0: immediately 1: Busy
2: No answer 3: Busy & No Answer
Activation:
1. Press MENU button, scroll up or
down key to select
Call Setting Call Forward (On).
2. Scroll up or down key to select
Voice Mail, or
Extension number (input ext. no.), or
Line number (input telephone no.)
3. Press condition of call forward
Result: The LCD show ‘’forward ‘ destination acknowledgement
Deactivation:
Press MENU button, scroll up or
down key to select Call
Setting Call Forward (Off).
Condition: Call forward to Line can be set at extension 1 –
9 for internal
call and extension 0 is set for Line to Line forward for the
system.