User guide

Circle Communication Products, Inc
2.4G Cordless Telephone System - Handheld Extension (WHE ER) user guide
Page 12
3.
Insert the tip of the AC adaptor into the
slot labeled DC 9V at the base of the
phone. Make sure that the tip is all the
way in. Plug the AC adaptor into an
electrical outlet. Position the cord
through the channel as given.
4. The best location for noise free operation
Move away from a microwave oven and locate the extension near the base console.
Move away from other cordless phones base unit.
Battery charge
Place the cordless handset on the base. Make sure the handset faces forward as shown.
The CHARGE indicator will light. You have to charge it for about 8 hours before initial use.
Battery use time per fully charge:
 6 hours continuous use at non speaker mode
 80 hours standby mode
Recharge:
Place the cordless handset on the base when
“ ” appears on the display
Note:
 The battery cannot be overcharge.
 When you charge the battery, you can feel it is warm. This is normal.
 The battery operating time may be shortened depending on usage conditions and
ambient temperature.