Specifications

45 / 48
4. When I try to connect to a computer over my network, it asks me for Net User ID and
Net Password. What should I use to connect to that computer?
The media center asks you to login as a security requirement. You can use the login
information for your computer – i.e. the username and password that your computer prompts
you to enter when you start your computer. After you enter it, make sure you choose “OK &
Save to My Shortcuts”. This will save your login information for future use. You can then
access that computer from the “My Shortcuts” menu under network / LAN.
5. I configured everything correctly, but still cannot get the wireless network connected.
Are you using a firewall such as Norton Internet Security, McAfee Personal Firewall, Zone
Alarm, etc. or even the built-in firewall of Windows XP? (Please note that Service Pack 2 for
Windows XP automatically upgrades your firewall and turns it on by default)
If you have a firewall, it may need to be configured or have exceptions created to allow you to
see and communicate with the player on the network. To test if your firewall is preventing
network communication (including PING and access shared folders), try disabling it to see if
you can connect. If you can connect with the firewall disabled, you may need to add the player
to the „Trusted‟ list or configure the firewall for local intranet access. Worst-case, disable your
firewall long enough to use the player, then enable it again when done.
6. When I am using the NAS function, I cannot copy files to the player.
Please check the file system format of the hard drive partitions on the player. NTFS partitions
are read-only on the system. Therefore, files cannot be written onto any NTFS partitions via
the NAS mode. However, you can copy the files you wish to the NTFS partitions via a USB
cable. Files can be copied to the FAT32 partition via the NAS feature.
R E C O R D I N G
7. I used the Timer Record feature to schedule a recording on Channel 7 for a later
date. In the meantime, I switched to Channel 2. When I came back to watch what I
recorded, it had recorded what was on Channel 2! Is there a way to set the channel
that I want to record?
The media center will record the channel that is fed in through the AV input. So, if you leave the
media center on channel 2, it will record what is on channel 2.
8. Can I record one channel while watching another?
The media center does not support recording and watching separate channels. You can watch
any content that is on your media player while a show is recording. So, if you have any movies
saved on the media player, or external memory, you can watch them while you are recording
Live TV.
9. How is Timeshift different from recording?
Timeshift is a temporary recording feature that allows you to pause Live TV, and come back to