Specifications

40 / 48
8. Firmware Upgrades
To check whether you have the latest firmware version:
1. Click the SETUP button on your remote control.
2. Select the MISC tab.
3. The firmware version number is displayed as SW Version
4. Compare it with the latest firmware version number on www.cirago.com/cmc2000
If there is a newer firmware version, download it and follow the steps below:
Step 1: Save files on a USB Flash Drive
You will need a USB flash drive to perform the firmware upgrade. Copy the files for upgrade to
USB flash drive.
Step 2: Connect the USB Flash Drive
Unplug the AC adapter from the media player. Plug the USB Flash Drive into one of the USB
ports of the player.
Step 3: Hold the POWER/STANDBY button
Press and hold the POWER button on the front panel.
Step 4: Connect the AC Adapter
Plug the power cable into the DC IN jack, wait for about 3 seconds or more, and then release
the POWER/STANDBY button;
Firmware installation will start in about 30 seconds. The LED indicators on the front panel will
light up and flash during installation. If it is connected to a TV set, a yellow installation page will
appear on the TV screen.