Specifications

39 / 48
7. NAS Function
In order for the CMC2000 to function as a Network Attached Storage device, copy the “sys” file
into the HDD1 (FAT32 partition) of the hard drive. You can use a USB flash drive or memory
card and the File Copy function to copy the file into the HDD1. You can also connect the
CMC2000 to your computer and copy the file over via USB. After copying the “sys” file to the
CMC2000, restart the device and it will appear as “NAS” in your network.
Download the “sys” file from: http://www.cirago.com/cmc2000
After you have connected the media player to your network, type: \\NAS or \\IP Address in the
Run window (click Run in the start menu) or the address bar of a browser (For example, if the
IP address of the player is 192.168.0.9, type: \\192.168.0.9 or \\NAS), and click OK or press
the Enter button on the keyboard.
The NAS can also be seen by going into Network Neighborhood on a Windows computer. It
will be named “NAS”.
Then you can view, and edit the files stored on the hard disk installed on the player. In this way,
you can also play and copy files via your wired or wireless network between your PC and the
player.