User manual

84
Cirago Multimedia Center
Also, if you are using a wireless adaptor other than the one provided, make sure that it has a Realtek chipset.
We strongly encourage using the wireless adaptor that is provided with the media center.
3. I configured everything correctly, but still cannot get the media center to connect to my wireless
network. What should I do?
Make sure that your wireless access point is actually broadcasting a signal. DHCP should be turned on. Also,
check to make sure that there are no IP conflicts with other devices on your network. To ensure that your
wireless network is working, make sure that other devices can connect to your wireless network. Try another
wireless adaptor with your media center. If that fails, connect to your network using an Ethernet cable to access
files on your network. Give us a call and we‟ll help get to the bottom of the problem!
4. When I try to connect to a computer over my network, it asks me for Net User ID and Net
Password. What should I use to connect to that computer?
The media center asks you to login as a security requirement. You can use the login information for your
computer – i.e. the username and password that your computer prompts you to enter when you start your
computer. After you enter it, make sure you choose “OK & Save to My Shortcuts”. This will save your login
information for future use. You can then access that computer from the “My Shortcuts” menu under network /
LAN.
R E C O R D I N G
5. I used the Timer Record feature to schedule a recording on Channel 7 for a later date. In the
meantime, I switched to Channel 2. When I came back to watch what I recorded, it had recorded
what was on Channel 2! Is there a way to set the channel that I want to record?
The media center will record the channel that is fed in through the AV input. So, if you leave the media center on
channel 2, it will record what is on channel 2.