User's Manual

25
Quick Start
USE CHARGING CRADLE
The Charging Cradle charges your mobile computer and a spare battery at the same time.
Presents charging compartment for mobile computer and spare battery
Provides micro USB socket on the back for charging
Supports USB Host Mode via a USB OTG cable
Completes charging in approximately 5 hours
Two LEDs, one for power connection status and one for battery charging status
Adapter input 100-240V, AC, 50/60Hz; output 5V, DC, 2A.
Note:
The Charging Cradle is for charging only. For data communication, use the micro USB cable
to connect the mobile computer to your PC or laptop.
To
charge your mobile computer on the Charging Cradle:
1) Insert the mobile computer onto the Charging Cradle. Press the mobile computer
down
till you hear a ‘click’ to make sure it is secured in the charging station. If the hardshell is
installed on the mobile computer, remove the cap on the Cradle’s charging station, and
insert the mobile computer.
2) Connect the adapter to the Cradle, and plug the other end into an electrical outlet.
The status of the mobile computer charging is shown on the device itself, while the LED
indicator on RS50 Charging Cradle shows the status of battery charging as below:
Cradle LED Indicator Status Description
Charging Red, solid Charging the battery
Red, blink Charging error
Green, solid Charging complete
No light Not charging