RS50 Mobile Computer (Android™ 6.0, Marshmallow) Version 1.
Preface PREFACE COPYRIGHT Copyright © 2017 CIPHERLAB CO., LTD. All rights reserved The information contained in this document, including all pictures, illustrations and software, is the proprietary information of CIPHERLAB CO., LTD. and its respective legal owners; it is protected by copyright laws and international copyright treaties, as well as other intellectual property laws and treaties, with all rights reserved.
Important Notices IMPORTANT NOTICES FOR USA FCC ID : Q3N-RS50 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication.
Important Notices FOR PRODUCT WITH LASER This laser component emits FDA / IEC Class 2 laser light at the exit port. Do NOT STARE INTO BEAM DIRECTLY. Do not aim the beam at the eyes. Any adjustments or performance excluding those specified may result in hazardous laser light exposure. ENVIRONMENT Operate the handy terminal at ambient temperatures from -20 °C to 50 °C and with humidity range from 10% to 90%.
Important Notices Do not use any batteries or charging devices which are not originally sold Do not replace the battery with an incorrect type, to avoid the risk of heat generation, fire, or explosion. Do not disassemble, incinerate or short circuit the battery. Do not touch the contact pins of the battery pack. Do not expose the handy terminal or battery to any flammable sources. Do not expose the handy terminal to extreme temperatures or soak it in water.
Important Notices 1) Open ReaderConfig and tap Scan Test on the menu bar. 2) Aim the scanning window at the barcode to read. Move the device, having the barcode located in the center of the scanning area. 3) Press any of the two side triggers. The scanning light beams to read the printed barcodes. The buzzer beeps after scanning. The scanning light goes off once the data is decoded, or when the decode timeout period has passed. Scan a 2D barcode 1) Open ReaderConfig and tap Scan Test on the menu bar.
Important Notices CONNECTION Via Bluetooth or WLAN Connection may fail when the handy terminal is around other wireless machines or power cables as the radio frequencies of those may cause interferences. If communication fails, move the devices much closer to each other, and try to communicate again After turning on, Bluetooth power is sustained even when the handy terminal is suspended.
Important Notices USA E-LABEL -8-
Important Notices EUROPE - EU DECLARATION OF CONFORMITY -9-
Important Notices - 10 -
Important Notices Česky [Czech] Dansk [Danish] Deutsch [German] Eesti [Estonian] English Español [Spanish] Ελληνική [Greek] Français [French] Italiano [Italian] Latviski [Latvian] Lietuvių [Lithuanian] Nederlands [Dutch] Malti [Maltese] Magyar [Hungarian] Polski [Polish] Português [Portuguese] Slovensko [Slovenian] Slovensky [Slovak] Suomi [Finnish] Svenska [Swedish] CIPHERLAB CO. LTD tímto prohlašuje, že tento RS50 je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.
Release Notes RELEASE NOTES Version Date Notes 1.00a Mar 23, 2016 2nd release 1.
CONTENTS PREFACE .......................................................................................................................................... - 2 Copyright ........................................................................................................................................ - 2 Disclaimer ...................................................................................................................................... - 2 Trademark Recognition..............................
Introduction INTRODUCTION The RS50 Mobile Computer, powered by Android™ 6.0, Marshmallow, is light-weight, easy to use, and provides more powerful and handy tools. Specifically designed to work as an industrial PDA, it provides rich options of data collection, voice and data communication, long-lasting working hours, and so on. Its large color transmissive display guarantees ease in reading in all lighting conditions. Integrated with Bluetooth v4.1, v2.1+EDR and 802.
Quick Start Chapter 1 QUICK START OVERVIEW 15
Quick Start No. Description No.
Quick Start INSTALLING BATTERY For shipping and storage purposes, the mobile computer and the main battery are saved in separate packages. Note: Any improper handling may reduce the battery life. To install the main battery: 1) Insert the main battery with the contact pins facing the lower end. Fix the lower edge of the battery first.
Quick Start REMOVE BATTERY 1) Press down the power key and tap “Power off” to shut down this device. 2) Slide the key latch Right, the battery will be unlocked with a “click” sound. 3) Lift the battery up from its upper end.
Quick Start INSTALLING SIM CARD, SAM CARD AND MEMORY CARD The RS50 Mobile Computer is equipped with two SIM card slots, one SAM card slot and one memory card slot. To insert the cards: 1) Remove the battery. 2) Inser your fingernail into the notch above the inner lid that protects the card sockets chamber and lift it up. 3) After the chamber is revealed, insert SIM cards, the SAM card and the microSD card into their respective sockets. Close and push back the hinged cover till a “click” sounds.
Quick Start 1.1.1. POWER ON/OFF MOBILE COMPUTER POWER ON To power on the mobile computer, press and hold the power button upper right side of the device. located on the Note: For the mobile computer to power on, the battery cover must be secured in place. Warning: When powering on this mobile computer, if you accidentally enter a hidden advanced boot menu, please use Volume Up key to select and Volume Down key to confirm [Normal Boot] to return to the normal booting process.
Quick Start 1.1.2. HOMESCREEN SELECTION Upon the first time you launch the system, a Select Home app window will pop up to request your immediate choice of home screen. By selecting “AppLock”, you will directly enter AppLock application (please refer to AppLock User Guide for detailed instructions on AppLock settings) to start configuring the interface provided to normal users of this device; by selecting “Launcher”, you will enter the default Android™ 6.0 home screen.
Quick Start 1.1.3. USING HARDWARE BUTTONS On the bottom of the mobile computer are three hardware buttons that deliver the following functions: Button Function Description Back button Returns to the previous screen or closes the active window or keyboard. Home button Displays the Home screen. Recent apps button Opens a list of recently used applications. 1.1.4. CONNECTING HEADSET The headset jack is located on the top of the mobile computer.
Quick Start 1.2. CHARGING & COMMUNICATION 1.2.1. CHARGE MOBILE COMPUTER The main battery may not be charged to full for shipment. When you first receive the kit package, you will need to charge the main battery to full before using the mobile computer. You may use the Snap-on Charging Cable or Charging Cradle along with a power adapter to charge the mobile computer.
Quick Start USE SNAP-ON CHARGING CABLE The Snap-on Charging Cable provides a convenient way to charge your mobile computer. 1) Fasten the Snap-on Charging Cable to the lower end of the mobile computer. 2) Connect the other end of the cable to the adapter. 3) Fix the adapter plug onto the adapter, and plug in into an electrical outlet. LED Status Indicator Click! While the device battery is being charged, the LED on mobile computer will indicate charging status.
Quick Start USE CHARGING CRADLE The Charging Cradle charges your mobile computer and a spare battery at the same time. Presents charging compartment for mobile computer and spare battery Provides micro USB socket on the back for charging Supports USB Host Mode via a USB OTG cable Completes charging in approximately 5 hours Two LEDs, one for power connection status and one for battery charging status Adapter input 100-240V, AC, 50/60Hz; output 5V, DC, 2A. Note: The Charging Cradle is for charging only.
Quick Start Note: (1) Not Charging could be the result of battery damage, battery’s failure to touch the connector, or AC plug coming off. (2) Charging error could be due to high battery temperature.
Quick Start 1.2.2. WIRED DATA TRANSMISSION Use the micro USB cable to connect the mobile computer to your PC for data transmission. 1) Connect your device to the computer with supplied USB cable. 2) Swipe down from the status bar to reveal Notifications Drawer. 3) Tap “USB for Charging” to enter USB options. By default, the device will be in charging mode, in which you are unable to access the files on this device from the PC client.
Specifications SPECIFICATIONS PLATFORM, PROCESSOR & MEMORY Operating System & CPU OS Version Android™ 6.0 Marshmallow with GMS Certified CPU Cortex A53 Octa-core Memory ROM 16GB eMMC RAM 2GB Expansion Slot One microSDHC card slot (up to 32GB) SDXC supported (up to 2TB) Micro SIM socket x2 Micro SAM socketx1 COMMUNICATION & DATA CAPTURE Communication USB Client USB 2.0 OTG WPAN Bluetooth 2.1EDR/4.0 BLE/V4.1 WLAN IEEE 802.
Specifications ELECTRICAL CHARACTERISTICS Batteries Main Battery Pack Rechargeable Li-ion battery: 3.8V, 5300mAh Charging temperature: 0-35°C Minimum charging time: 5 hours @25°C Please Charge batteries in temperatures from 0°C to 35°C. To ensure that the battery is being charged under a safe condition, the battery may disable charging when ambient temperature drops below 0°C or exceeds 40°C, and resume charging after its temperature falls within the acceptable range.
Specifications ENVIRONMENTAL CHARACTERISTICS Temperature Operating -20°C to 50°C Storage -30°C to 70°C Charging 0°C to 35°C Humidity Operating 5% to 85% (non-condensing) Resistance Impact Resistance Multiple drops onto concrete at 1.
Specifications PROGRAMMING SUPPORT Development Environment & Tools JAVA Environment Android studio Software Development Kit: JAR C# Environment: Visual Studio Software Development Kit: DLL (Xamarin Library) Software & Utilities Software Package Reader Configuration Software Trigger Key Programmable Keys WMDS Server ADC Client App Lock HF RFOD Config 31
