User's Manual

9200 Mobile Computer Reference Manual

4.2.3.

MANUALLY ADD WI-FI NETWORK

If the network you would like to connect to does not broadcast its SSID, or if the network

is out of range, you may add it manually.

1) On the Wi-Fi screen, tap the add button

seated at the bottom.

2) In the dialog box, enter the name of the network in the Network SSID field, and

select a security method in the Security field (None, WEP, WPA/WPA2 PSK, 802.1x

EAP).

 For WEP/WPA/WPA2 PSK connections: Enter the required password and tap Save.

 For 802.1x EAP connections: Check the Show advanced options checkbox and

select the EAP method in the drop-down box (PEAP, TLS, TTLS, PWD, SIM, AKA),

and the Phase 2 authentication in the drop-down box (None, MSCHAPV2, GTC).

Select a CA certificate and User certificate if required (certificates may be installed

under Home | Settings | Security.) Enter your username in the Identity box and

the password in the Password box if required.

3) If necessary, select the Proxy server and IPv4 settings. By default, no proxy is set

and IP settings are set to DHCP.