User's Manual

72
9400 Mobile Computer Reference Manual
4.1 WIRELESS POWER MANAGER
Wireless Power Manager is a control panel applet, which allows you to choose and
enable 802.11b/g or GPRS card.
Note: Meanwhile, you may enable Bluetooth connectivity through the Bluetooth
Manager.
1) Double-tap the associated icon on the taskbar to run Wireless Power
Manager.
2) Select the wireless connectivity you desire, and then tap
.
It takes several seconds to turn on the power to the wireless module and install
the driver. When both GPRS and 802.11b/g are enabled on battery power, the
main battery charge will drop down substantially.
Double-tap any of the following icons to access power management.
The icon indicates that GPRS Power is turned on.
The icon indicates that 802.11b/g Power is turned on.
Note: You may need to turn off the wireless power or simply stop the wireless signals
at times, in order to conserve battery power, or in situations where the use of
radio is prohibited, such as on airplanes, in hospitals, etc.