User's Manual

51
Chapter 2 錯誤! 尚未定義樣式。
2) Run DLDR.exe on your computer.
3) Press [Reset] +
to perform a hardware reset on 9400.
4) Press
+ simultaneously in three seconds so that 9400 can enter the
"Download" mode.
5) Seat 9400 in the cradle.
6) Press
on 9400 to start image update.
It will take approximately 5 minutes to update the image. A message will be
displayed on the mobile computer to indicate the OS update is completed
successfully.
7) Wait a few seconds for a software reset will be performed automatically.
8) Press [Reset] +
to perform a hardware reset on 9400 again.
Warning: Do not press any key on the mobile computer while updating OS
image. Once the OS update is completed, you cannot reload any
older image.