User's Manual

129
Appendix III 錯誤! 尚未定義樣式。
Verify Checksum Decide whether to verify the checksum. If the
checksum is incorrect, the barcode will not be
accepted.
 No verification
 One Check Digit
 Two Check Digits
No
Transmit Checksum Decide whether to include the checksum in the
data being transmitted.
 "Verify Checksum" must be enabled so that the
checksum can be left out (= "Transmit
Checksum" disabled).
No
Select Length
 One or two fixed lengths
 Range (1~55)
4~55
Postal Codes ---
US Postnet Enable
US Planet Enable
Transmit US Postal
Checksum
US Postnet or US Planet must be enabled first! Enable
UK Postal Enable
Transmit UK Postal
Checksum
UK Postal must be enabled first! Enable
Japan Postal Enable
Australian Postal Enable
Dutch Postal Enable
Composite Codes Disable
Composite CC-C Disable
Composite CC-A/B Disable
Composite TLC-39 Disable
UCC/EAN Code
128 Emulation
Mode
Transmit data as if it was encoded in Code 128
barcodes.
 Transmit AIM Code Identifier must be enabled
first!
Disable