User's Manual

124
9400 Mobile Computer Reference Manual
Level 2 All barcodes must be successfully read twice before being
decoded.
Level 3 All barcodes except for the following barcodes must be
successfully read twice before being decoded.
BARCODE TYPES
“EXCLUDED”
CODE LENGTH
MSI 4 characters of
less
Codabar 8 characters of
less
Discrete 25 (=Industrial
25)
8 characters of
less
Interleaved 25 8 characters of
less
Level 4 All barcodes must be successfully read three times before
being decoded.
Security Level
Select a decode security level appropriate for the
barcode quality when reading delta barcodes
such as Code 128, Code 93, UPC/EAN.
 Security Level 0 – This default setting allows the
scan engine to operate in its most aggressive
state, providing sufficient security in decoding
most “in-spec” barcodes.
 Security Level 1 – Select this option if
misdecodes occur. This level should eliminate
most misdecodes.
 Security Level 2 – Select this option if Security
Level 1 fails to eliminate misdecodes.
 Security Level 3 – Select this option if Security
Level 2 also fails to eliminate misdecodes.
However, selecting this option impairs the
decoding ability of the scan engine. If this level
of security is necessary, try to improve the
barcode quality.
Level 1
Decode Time-out Set the maximum time for decoding to continue
during a scan attempt.
 5~99, in units of 0.1 second.
9.9 sec.
SYMBOLOGY SETTINGS TABLE