User's Manual

120
9400 Mobile Computer Reference Manual
Verify Checksum Decide whether to verify the checksum. If the
checksum is incorrect, the barcode will not be
accepted.
No
Transmit Checksum Decide whether to include the checksum in the
data being transmitted.
Yes
Code 39 Full ASCII Code 39 Full ASCII includes all the alphanumeric
and special characters.
Disable
Code 93 Enable
MSI Disable
Verify Checksum Select one of the three calculation formulas to
verify the checksum. If the checksum is incorrect,
the barcode will not be accepted.
 Single Modulo 10
 Double Modulo 10
 Modulo 11 & 10
Single
Modulo 10
Transmit Checksum Decide whether to include the checksum in the
data being transmitted.
 Last digit not transmitted
 Both digits transmitted
 Both digits not transmitted
Both digits
transmitted
Select Length
 One or two fixed lengths
 Range (1~127)
4~127
Negative Barcode Disable
Plessey Disable
Convert to UK
Plessey
When applied, each occurrence of the character
"A" in the barcode data will be replaced by the
character "X".
No
Transmit Checksum Decide whether to include the checksum (2 digits)
in the data being transmitted.
Yes
Telepen Disable
Original Telepen
(Numeric)
The original Telepen includes numeric characters. Yes
AIM Telepen (Full
ASCII)
AIM Telepen (Full ASCII) includes all the
alphanumeric and special characters.
No
RSS-14 Disable
Transmit Code ID Decide whether to include Code ID ("]e0") will be
included in the data being transmitted.
Yes