User's Manual

119
Appendix II 錯誤! 尚未定義樣式。
Transmit Checksum Decide whether to include the checksum in the
data being transmitted.
Yes
Select Length
 One or two fixed lengths
 Range (1~127)
4~127
Interleaved 25 Enable
Start/Stop Selection Refer to Industrial 25. Interleave
d 25
Verify Checksum Decide whether to verify the checksum. If the
checksum is incorrect, the barcode will not be
accepted.
No
Transmit Checksum Decide whether to include the checksum in the
data being transmitted.
Yes
Select Length
 One or two fixed lengths
 Range (1~127)
4~127
Matrix 25 Disable
Start/Stop Selection Refer to Industrial 25. Matrix 25
Verify Checksum Decide whether to verify the checksum. If the
checksum is incorrect, the barcode will not be
accepted.
No
Transmit Checksum Decide whether to include the checksum in the
data being transmitted.
Yes
Select Length
 One or two fixed lengths
 Range (1~127)
4~127
French Pharmacode Disable
*Transmit Start/Stop
Character
Controlled by the same setting of Code 39. No
Transmit Checksum Decide whether to include the checksum in the
data being transmitted.
Yes
Italian Pharmacode (= Code 32) Disable
*Transmit Start/Stop
Character
Controlled by the same setting of Code 39. No
Transmit Checksum Decide whether to include the checksum in the
data being transmitted.
Yes
Code 39 Enable
Transmit Start/Stop
Character
Decide whether to include the start/stop
characters "*" in the data being transmitted.
No