User's Manual

118
9400 Mobile Computer Reference Manual
SYMBOLOGY SETTINGS TABLE
CCD/LASER DESCRIPTION DEFAULT
Codabar Enable
Select Start/Stop
Characters
If "Transmit Start/Stop Characters" is desired, select
one set:
 abcd / abcd
 abcd / tn*e
 ABCD / ABCD
 ABCD / TN*E
abcd /
abcd
Transmit Start/Stop
Characters
Decide whether to include the start/stop
characters in the data being transmitted.
No
Code 128 / EAN-128 Enable
Transmit Code ID
(for EAN-128)
Decide whether to include Code ID (“]C1”) will be
included in the data being transmitted.
No
Industrial 25 (= Discrete 25) Enable
Start/Stop Selection This decides the readability of all 2 of 5 symbology
variants. For example, flight tickets actually use an
Industrial 2 of 5 barcode but with Interleaved 2 of
5 start/stop pattern. In order to read this barcode,
the start/stop pattern selection parameter of
Industrial 2 of 5 should set to "Interleaved 25".
Industrial
25
Verify Checksum Decide whether to verify the checksum. If the
checksum is incorrect, the barcode will not be
accepted.
No