User's Manual

116
9400 Mobile Computer Reference Manual
READER SETTINGS TABLE
CCD/LASER DESCRIPTION DEFAULT
Scan Mode Laser mode
Continuous Mode Non-stop scanning
 To decode the same barcode repeatedly, move away the
scan beam and target it at the barcode for each scanning.
Test Mode Non-stop scanning
 Capable of decoding the same barcode repeatedly
Repeat Mode Non-stop scanning
 Capable of re-transmitting barcode data if triggering within
one second after a successful decoding
Momentary Mode Hold down the scan trigger to start with scanning.
 The scanning won't stop until you release the trigger.
Alternate Mode Press the scan trigger to start with scanning.
 The scanning won't stop until you press the trigger again.
Aiming Mode Press the scan trigger to aim at a barcode. Within one second,
press the trigger again to decode the barcode.
 The scanning won't stop until (a) a barcode is decoded or
(b) the pre-set timeout expires.
Laser Mode Hold down the scan trigger to start with scanning.
 The scanning won't stop until (a) a barcode is read, (b) the
preset timeout expires, or (c) you release the trigger.
Auto Off Mode Press the scan trigger to start with scanning.
 The scanning won't stop until (a) a barcode is read or (b)
the preset timeout expires.
Auto Power Off
Mode
Press the scan trigger to start with scanning.
 The scanning won't stop until the preset timeout expires,
and, the preset timeout period re-counts after each
successful decoding.