User's Manual

Chapter 4

4.6 BUTTON ASSIGNMENT UTILITY

The CipherLab Button Assignment Utility allows the following keys to be re-defined as

another key or to serve as a shortcut key for launching a specific program.

 P1 and P2 on the keypad (Programmable key 1 & key 2)

 SCAN key on the keypad

 Side triggers on each side of the touch screen – Left-Up, Left-Down, Right-Up, and

Right-Down keys

Note: By default, the four side triggers are programmed to serve as ENTER keys

(upper ones) as well as SCAN keys (lower ones).

Now go to Start > Programs > Buttons to open the CipherLab Button Assignment

Utility.

1) Tap the label of one of these seven keys.

For example, tap [Left Up] to configure the upper-left side trigger.