User's Manual

80
Terminal Reference Manual
4.3 READER CONFIGURATION UTILITY
The Reader Configuration Utility is the control applet and tool to manage the
barcode and RFID readers integrated on the mobile computer.
1) Go to Start > Programs > 94ReaderConfig to open the Reader Configuration Utility.
The associated icon
will appear on the taskbar.
2) Tap and hold the icon
to access the menu that allows you to choose and
enable one or both of the readers. There will be a check mark in front of the
reader if it is enabled.
If the RFID Reader is installed, the option will be available.
3) To meet your application requirements, proceed to configure associated reader
settings as well as barcode settings.
Note: (1) The 94ReaderCfg applet will automatically detect the reader module(s)
that is currently installed in the mobile computer.
(2) If you wish to reload the default settings, delete the
ReaderCfgINI.txt file in DiskOnChip.