User's Manual

59
Summit Client Utility, also referred to as SCU, lets you configure and connect to
network wirelessly.
IN THIS CHAPTER
4.1 Turn On Wi-Fi Power .................................................. 59
4.2 Summit Client Utility .................................................. 60
4.1 TURN ON WI-FI POWER
1) Double-tap the associated icon on the taskbar to access Power Management.
2) Select [Wi-Fi Power ON] and tap
.
Warning: When both GPRS and 802.11b/g are enabled on battery power, the main
battery charge will drop down substantially.
3) It takes several seconds to turn on the power to module and install the driver.
The Summit system tray icon
will appear as shown below:
 The icon indicates that 802.11b/g power is turned on, and the green bars
indicate the wireless signal strength. The more the bars, the stronger the signal.
 Double-tap any of these icons to access Summit Client Utility.
Chapter 4
USING 802.11 RADIO