User's Manual

Chapter 5 83
1D tab: CCD / Laser
Code 39 Supported on CCD / Laser Default
Enabled or Disabled Enabled
Transmit Start / Stop
When enabled, the start / stop characters will be
included in the data being transmitted.
OFF (Disabled)
Verify Checksum
When enabled, the checksum verification will be
performed in decoding.
If the checksum is incorrect, data will be rejected.
OFF (Disabled)
Transmit Checksum
The checksum character is included in the data being
transmitted.
ON (Enabled)
Code 39 Full ASCII
When enabled, Code 39 Full ASCII will be supported
instead. All the alphanumeric and special characters are
included.
OFF (Disabled)
Italian Pharmacode
Supported on CCD / Laser Default
Enabled or Disabled Disabled
Transmit Start / Stop
*Share the setting of Code 39.
Transmit Checksum
The checksum character is included in the data being
transmitted.
ON (Enabled)
French Pharmacode
Supported on CCD / Laser Default
Enabled or Disabled Disabled
Transmit Start / Stop
*Share the setting of Code 39.
Transmit Checksum
The checksum character is included in the data being
transmitted.
ON (Enabled)
Industrial 25
Supported on CCD / Laser Default
Enabled or Disabled Enabled
Start / Stop
Character
The start / stop character of the selected barcode is
included in the data being transmitted.
 Industrial 25
 Interleaved 25
 Matrix 25
Industrial 25
Verify Checksum
When enabled, the checksum verification will be
performed in decoding.
OFF (Disabled)