User's Manual

78 9500CE Terminal Reference Manual
5.3 ReaderConfig
ReaderConfig is the control applet and tool to manage the barcode and RFID readers
integrated on the terminal.
1. Double-tap the ReaderConfig shortcut on the desktop. The associated icon
will
appear on the taskbar.
2. Tap and hold on the icon to access the menu that allows you to choose and enable one or
both of the readers. There will be a check mark in front of the reader if it is enabled.
 BC Reader: 1D or 2D
 RFID Reader
3. To meet your application requirements, proceed to configure associated reader settings.
Note: The program ReaderCfg will automatically detect the reader module(s) that is
currently installed in the terminal.