User's Manual

62 9500CE Terminal Reference Manual
4.2.5 BTPAN
Tap and hold on “BTPAN1”.
Enable / Disable
Icons Description
By default, the Ethernet module is enabled.
When the Bluetooth PAN service is connected through the Bluetooth
Manager, the status icon
will become .
Tap and hold on “BTPAN1”, and select [Disable]. The status icon will
disappear.
Properties
By default, DHCP is enabled, and therefore, there is no need to configure the IP
settings. If you want to assign a static IP address to the terminal, tap and hold on
“BTPAN1”, and then select [Properties].
Note: Only change these settings according to your network administrator’s instructions.