User's Manual

Chapter 4 61
Icons Description
By default, the 802.11b/g module is disabled. No status icon.
Enable the 802.11b/g module through the Wireless Power Manager. The
icon
on the taskbar will become , and the status icon will
appear.
When successfully connecting to an access point or other Wi-Fi enabled
device, the status icon
will become .
Properties
By default, DHCP is enabled, and therefore, there is no need to configure the IP
settings. If you want to assign a static IP address to the terminal, tap and hold on
“WLAN1”, and then select [Properties].
Note: Only change these settings according to your network administrator’s instructions.