User's Manual

56 9500CE Terminal Reference Manual
4.2.1 USB Connection
Tap and hold on “USB Connection”.
 Most options can be found in the Connection menu on the toolbar as well.
When you select [Set as Default], the USB Connection will become the default
connection used for browsing the Internet.
Note: Please ignore [Properties] as the associated settings will not take effect.
Connect / Disconnect
The USB connection is specifically for performing the ActiveSync operation.
Generally, it will automatically establish the connection and start the ActiveSync
operation when you seat the terminal in the cradle. To stop the ActiveSync
operation, simply remove the terminal.
If you want to stop the ActiveSync operation without removing the terminal from
the cradle, tap and hold on “USB Connection”, and select [Status]. Then, tap
[Disconnect] in the dialog box.
 When connected, the status icon
will appear on the taskbar.
 When disconnected, this icon will disappear.