User's Manual

Chapter 4 53
Connect a mouse to the cradle via the USB Host port.
In the [Mouse Properties] dialog box, you may configure and test your double-click
settings.
In the [Network and Dial-up Connections] window, you may configure settings for
the terminal connects to a network directly or through a modem. Alternatively, you
may tap Start > Settings > Network and Dial-up Connections.
 USB Connection (via USB client port on the cradle)
 AX88772 (via Ethernet port on the cradle)
 WLAN (via 802.11b/g)
 BTPAN (via Bluetooth)
In the [Owner Properties] dialog box,
 Identification/Notes tab: Enter your contact information or notes.
 Network ID tab: Enter the user name, password, and domain name used to log on
to the remote network.
In the [Password Properties] dialog box, you may apply password protection to limit
access to the terminal.
In the [PC Connection Properties] dialog box, you may disable the direct connection
between the terminal and a computer.
By default, the terminal is enabled to directly connect to a computer via the cradle’s
USB port. Alternatively, you may tap Start > Settings > Network and Dial-up
Connections and select USB Connection.
In the [Power Properties] dialog box,
 Battery tab: You may view the current status of main and backup batteries.
 Schemes tab: You may configure the power scheme and switching.
 Device Status tab: You may view the devices that are consuming power.
In the [Regional and Language Settings] dialog box,
 Region tab: You may customize the appearance and formatting to your
geographic region.
 Language tab: By default, it is set to English (United States).
 Input tab: By default, it is set to English (United States)-US.
In the [Remove Programs] dialog box, you may remove any program that is installed
earlier.
In the [Stylus Properties] dialog box,
 Double-Tap tab: You may configure and test your double-tap settings.
 Calibration tab: You may need to re-calibrate the touch screen if it is not
responding properly to your taps.