User's Manual

34 9500CE Terminal Reference Manual
3.1.2 Turn On/Off
Like your PDA, Pocket PC and most handheld devices, the 9500CE Terminal terminal
functions when it is turned on. This is because the Windows CE operating system
eliminates the booting process and runs continuously.
Turn On (= Resume from Suspend)
To turn on the terminal, simply press the [Power] key.
Turn Off (= Suspend)
To turn off the terminal, press the [Power] key again, or select Suspend from the Start Menu.
The system is now ready for use but not in use. This is referred to as Suspend mode or Standby
mode. It means the system is in power-saving status and waiting for user interference.
Warning: To save battery power, it is suggested that the terminal is set to be
automatically turned off when not in use. Refer to the Power Management
section for more information about saving power.
3.1.3 Desktop Window
The desktop appears when the terminal is turned on (left below). Tap and hold on the blank
area to manage or configure the desktop (right below).