User's Manual

104 9500CE Terminal Reference Manual
TLC-39
Enable UPC
Composite Mode
UPC barcodes can be “linked” with a 2D barcode
during transmission as if they were one barcode. There
are three options for these composite barcodes:
 UPC Never Linked
(to transmit UPC barcodes only, regardless of
whether a 2D barcode is detected)
 UPC Always Linked
(to transmit UPC barcodes and the 2D portion; if
2D is not present, it will not transmit UPC
barcodes, i.e. CC-A/B or CC-C must be enabled!)
 Autodiscriminate UPC Composites
(to transmit UPC barcodes, as well as the 2D
portion if present)
UPC Always
Linked
Enable UCC/EAN
Code 128 Emulation
YES or NO NO (Disabled)
2D Symbologies
Supported on 2D Reader Default
Enable PDF417
YES or NO YES (Enabled)
Enable MicroPDF417
YES or NO NO (Disabled)
Enable Code 128
Emulation
YES or NO
*MicroPDF417 must be enabled!
If Code 128 Emulation is enabled, these MicroPDF417
barcodes are transmitted with one of the following
prefixes:
 ]C1 if the first codeword is 903-907, 912, 914, 915
 ]C2 if the first codeword is 908 or 909
 ]C0 if the first codeword is 910 or 911
If disabled, they are transmitted with one of the
following prefixes:
 ]L3 if the first codeword is 903-907, 912, 914, 915
 ]L4 if the first codeword is 908 or 909
 ]L5 if the first codeword is 910 or 911
NO (Disabled)
Enable Data Matrix
YES or NO YES (Enabled)
Enable MaxiCode
YES or NO YES (Enabled)
Enable QR Code
YES or NO YES (Enabled)
Macro PDF
Supported on 2D Reader Default
Transmit / Decode
Mode
There are three options for handling Macro PDF
decoding:
Passthrough All
Symbols