User's Manual

98 9500CE Terminal Reference Manual
2D tab
UPC / EAN Supported on 2D Reader Default
Enable UPC-A
YES or NO YES (Enabled)
Enable UPC-E0
YES or NO YES (Enabled)
Enable UPC-E1
YES or NO NO (Disabled)
Enable EAN-8
YES or NO YES (Enabled)
Enable EAN-13
YES or NO YES (Enabled)
Enable Bookland
EAN
YES or NO
*EAN-13 must be enabled!
NO (Disabled)
Decode
Supplementary
Digits (Addon 2 & 5)
When enabled, Addon 2 and Addon 5 of UPC /EAN
families can be decoded too.
 Ignore Supplementals
 Only with Supplementals (Decode barcodes with
Addons only.)
 Enable Supplementals (Decode barcodes with or
without Addons.)
Ignore
Supplementals
(Disabled)
Supplementary
Redundancy
With “Enable Supplementals” is selected, it will
autodiscriminate barcodes with or without
supplementals.
Select a desired level of reading (decoding) security.
Comprise some speed for getting more security when
necessary. By default, it requires ten more successful
decoding to make the reading of supplementals
(Addons) valid.
 1~255 (decode times)
10 times
Transmit UPC-A
Check Digit
YES or NO YES (Enabled)
Transmit UPC-E0
Check Digit
YES or NO YES (Enabled)
Transmit UPC-E1
Check Digit
YES or NO YES (Enabled)
UPC-A Preamble
By default, the selected UPC-A preamble is included in
the data being transmitted.
 No Preamble
 System Character
 System Character & Country Code
System
Character
UPC-E0 Preamble
By default, the selected UPC-E0 preamble is included
in the data being transmitted.
System
Character
UPC-E1 Preamble
By default, the selected UPC-E1 preamble is included
in the data being transmitted.
System
Character
Convert UPC-E0 to
When enabled, the UPC-E0 reading will be expanded NO (Disabled)