User's Manual

Chapter 5 錯誤! 尚未定義樣式。 87
and 979 will be converted to ISBN.
Convert to ISSN
When enabled, the EAN-13 reading that starts with 977
will be converted to ISSN.
OFF (Disabled)
Transmit Checksum
The checksum character is included in the data being
transmitted.
ON (Enabled)
Transmit Addon 2
When enabled, EAN-13 Addon 2 can be decoded too. OFF (Disabled)
Transmit Addon 5
When enabled, EAN-13 Addon 5 can be decoded too. OFF (Disabled)
UPC-A Supported on CCD / Laser Default
*Share the setting of EAN-13. Enabled
Convert to EAN-13
The UPC-A reading will be expanded into EAN-13. It
will then be processed according to the settings of
EAN-13.
ON (Enabled)
Transmit System
Number
The system number is included in the data being
transmitted.
ON (Enabled)
Transmit Checksum
The checksum character is included in the data being
transmitted.
ON (Enabled)
Transmit Addon 2
Share the setting of EAN-13 OFF (Disabled)
Transmit Addon 5
Share the setting of EAN-13 OFF (Disabled)
Telepen Supported on CCD / Laser Default
Enabled or Disabled Disabled
Telepen Type
 Telepen Numeric is supported by default.
 Select AIM (Full ASCII) so that Telepen Full
ASCII is supported. All the alphanumeric and
special characters are included.
Original
(Numeric)
RSS-14 Supported on CCD / Laser Default
Enabled or Disabled Disabled
Transmit Checksum
The checksum character is included in the data being
transmitted.
ON (Enabled)
Transmit Application
ID
The Application ID is included in the data being
transmitted.
ON (Enabled)
Transmit Code ID
The Code ID (default to “]e0”) is included in the data
being transmitted.
ON (Enabled)