User's Manual

Chapter 5 錯誤! 尚未定義樣式。 85
 Matrix 25
Verify Checksum
When enabled, the checksum verification will be
performed in decoding.
If the checksum is incorrect, data will be rejected.
OFF (Disabled)
Transmit Checksum
The checksum character is included in the data being
transmitted.
ON (Enabled)
Length Qualification
Refer to Industrial 25 above.
 Fixed Length
 Max / Min Length
Max / Min
Length
Maximum Length
0~127 characters 127
Minimum Length
0~127 characters 1
Codabar Supported on CCD / Laser Default
Enabled or Disabled Enabled
Start / Stop
Character
When enabled, the selected start / stop characters will
be included in the data being transmitted.
 None
 abcd / abcd
 abcd / tn*e
 ABCD / ABCD
 ABCD / TN*E
None
MSI Supported on CCD / Laser Default
Enabled or Disabled Disabled
Verify Checksum
Using the selected calculation method, the checksum
verification is performed in decoding.
If the checksum is incorrect, data will be rejected.
 Single Modulo 10
 Double Modulo 10
 Modulo 11 & 10
Single Modulo
10
Transmit Checksum
Based on the selected conditions, the checksum
characters are included in the data being transmitted.
 Last digit not transmitted
 Transmitted
 Last 2 digits not transmitted
Transmitted
Length Qualification
Refer to Industrial 25 above.
 Fixed Length
Max / Min
Length