User's Manual
III 
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to 
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, uses and can radiate radio frequency 
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to 
radio communications. However, there is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by 
one or more of the following measures: 
  Reorient or relocate the receiving antenna. 
  Increase the separation between the equipment and receiver. 
  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 
  Consult the dealer or an experienced radio/TV technician for help. 
  RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE 
  DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS 
  The use of any batteries or charging devices, which are not originally sold or manufactured by 
CipherLab, will void your warranty and may cause damage to human body or the product itself. 
  The charging and communication cradle uses an AC power adaptor. A socket outlet shall be installed 
near the equipment and shall be easily accessible. The power adaptor should comply with L.P.S test. 
Make sure there is stable power supply for the terminal or its peripherals to operate properly. 
  DO NOT disassemble, incinerate or short circuit the battery pack. 
  DO NOT expose the terminal or the battery pack to any flammable sources. 
  Under no circumstances, internal components are self-serviceable. 
  Per FDA and IEC standards, the scan engines described in this manual are not given a laser 
classification. However, the following precautions should be observed: 
     CAUTION 
This laser component emits FDA/IEC Class 2 laser light at the exit port. Do not stare into beam. 
FCC Regulations 
Important Safety Precautions 










