User's Manual

Appendix I 錯誤! 尚未定義樣式。 115
Laser Mode
This mode is most often used on laser scanners.
 Hold down the scan trigger to start scanning.
 The scanning continues until one of the events happens:
(1) A barcode is read.
(2) The preset timeout expires.
(3) The trigger is released.
Auto Off Mode
This is the default mode.
 The reader will start to scan once the scan trigger is pressed.
 The scanning continues until one of the events happens:
(1) A barcode is read.
(2) The preset timeout expires.
Auto Power Off Mode
 The reader will start to scan once the scan trigger is pressed.
 The scanning continues until one of the events happens:
(1) The preset timeout expires.
 Comparing to the Auto Off mode, the reader continues to scan whenever there is a successful
reading of barcode because its timeout period re-counts.