User's Manual

Chapter 5 錯誤! 尚未定義樣式。 97
Note: For the use of a different program rather than ReaderCfg, a dynamic-link library
(DLL) file is provided.
Auto ENTER
This function can spare you the trouble of pressing the
[Enter] key on the terminal to confirm each scan. It will
automatically add an ENTER character in front or to
the end of one scan.
 No
 Scan + ENTER (time-saving)
 ENTER + Scan (efficient for continuous scanning)
Scan + ENTER
Auto ENTER
Character
*Auto ENTER must be enabled.
 None
 Carriage Return
 Tab
 Space
 Comma
 Semicolon
Carriage Return
Prefix Code
0~10 characters NULL
Suffix Code
0~10 characters NULL
Include Cody Type
YES or NO
NO (Disabled)
Include Cody Length
YES or NO
NO (Disabled)
Barcode Decode
Timeout
5~99 (0.1 sec.) 9.9 seconds
Timeout When
Decode Same
Barcode
0~99 (0.1 sec.) 0.6 seconds
Decoding
Autoexposure
ON or OFF ON
Decoding
Illumination
ON or OFF ON
Decoding Aiming
Pattern
ON or OFF ON
RFID Settings will be displayed if the RFID reader is installed!
Check reader status
when start session
When running the program, it will take a few seconds
to check status of the reader, barcode reader or RFID
reader, before starting the session.
 YES or NO
YES (Enabled)