User's Manual

Chapter 5 錯誤! 尚未定義樣式。 95
MSI Supported on (Extra) Long Range Laser Default
Enable MSI
YES or NO NO (Disabled)
Select Discrete
Length
Refer to Interleaved 25 above. Any Length
Check Digit
Select check digit(s) to transmit and verify:
 One MSI Check Digit
 Two MSI Check Digits
One MSI Check
Digit
Transmit Check Digit
When enabled, the check digit(s) will be included in the
data being transmitted.
NO (Disabled)
Check Digit
Algorithm
With MSI barcodes, one check digit is mandatory and
always verified (using Single Modulo 10). The second
check digit is optional.
If two check digits are included, select a calculation
method for the checksum verification to be performed
in decoding.
If the checksum is incorrect, data will be rejected.
 MOD 10 / MOD 11
 MOD 10 / MOD 10
MOD 10 / MOD
11
RSS-14 Supported on (Extra) Long Range Laser Default
Enable RSS-14
YES or NO YES (Enabled)
Enable RSS Limited
YES or NO YES (Enabled)
Enable RSS
Expanded
YES or NO YES (Enabled)
Convert RSS to
UPC/EAN
This only applies to RSS-14 and RSS Limited barcodes
not decoded as part of a Composite barcode.
(1) When enabled, the leading “010” will be
stripped from these barcodes and a “0” will be
encoded as the first digit; this will convert
RSS barcodes to EAN-13.
(2) For barcodes beginning with two or more
zeros but not six zeros, this option will strip
the leading “0010” and report the barcode as
UPC-A. The UPC-A Preamble setting that
transmits the system character and country
code applies to such converted codes.
*Neither the system character nor the check
digit can be stripped.
NO (Disabled)