User's Manual

92 9500CE Reference Manual
Convert UPC-E0 to
UPC-A
When enabled, the UPC-E0 reading will be expanded
into UPC-A. It will then be processed according to the
settings of UPC-A.
NO (Disabled)
Convert UPC-E1 to
UPC-A
When enabled, the UPC-E1 reading will be expanded
into UPC-A. It will then be processed according to the
settings of UPC-A.
NO (Disabled)
Convert EAN-8 to
EAN-13
When enabled, the EAN-8 reading will be expanded
into EAN-13. It will then be processed according to the
settings of EAN-13.
NO (Disabled)
UCC Coupon
Extended Code
When enabled, it will decode UPC-A barcodes starting
with digit “5”, EAN-13 barcodes starting with digit
“99”, and UPC-A/EAN-128 coupon codes.
*UPC-A, EAN-13, and EAN-128 must be enabled!
**Use “Supplemental Redundancy” to control
auto-discrimination of the EAN-128 (right half) of a
coupon code.
NO (Disabled)
Code 128 Supported on (Extra) Long Range Laser Default
Enable Code 128
YES or NO YES (Enabled)
Enable EAN-128
YES or NO YES (Enabled)
Enable ISBT 128
YES or NO YES (Enabled)
Code 39 Supported on (Extra) Long Range Laser Default
Enable Code 39
YES or NO YES (Enabled)
Enable Trioptic Code
39
YES or NO NO (Disabled)
Convert Code 39 to
Code 32
Code 32 is a variant of Code 39 used by the Italian
pharmaceutical industry.
When enabled, it will decode Code 32 barcodes as
well.
*Code 39 must be enabled!
NO (Disabled)
Code 32 Prefix
When enabled, the prefix character “A” will be added
to all Code 32 barcodes.
*“Convert Code 39 to Code 32” must be enabled!
NO (Disabled)
Select Discrete
Length
The length of a barcode refers to the number of
characters (i.e. human readable characters), including
check digit(s) it contains.
 Any Length
 One Discrete Length
 Two Discrete Lengths
Any Length