User's Manual

90 9500CE Reference Manual
Note: For the use of a different program rather than ReaderCfg, a dynamic-link library
(DLL) file is provided.
Auto ENTER
This function can spare you the trouble of pressing the
[Enter] key on the terminal to confirm each scan. It will
automatically add an ENTER character in front or to
the end of one scan.
 No
 Scan + ENTER (time-saving)
 ENTER + Scan (efficient for continuous scanning)
Scan + ENTER
Auto ENTER
Character
*Auto ENTER must be enabled.
 None
 Carriage Return
 Tab
 Space
 Comma
 Semicolon
Carriage Return
Prefix Code
0~10 characters NULL
Suffix Code
0~10 characters NULL
Include Cody Type
YES or NO
NO (Disabled)
Include Cody Length
YES or NO
NO (Disabled)
Barcode Decode
Timeout
1~99 (0.1 sec.) 3.0 seconds
Timeout When
Decode Same
Barcode
0~99 (0.1 sec.) 1.0 seconds
AIM Duration
0~99 (0.1 sec.) 0.0 seconds
RFID Settings will be displayed if the RFID reader is installed!
Check reader status
when start session
When running the program, it will take a few seconds
to check status of the reader, barcode reader or RFID
reader, before starting the session.
 YES or NO
YES (Enabled)