User's Manual

34 CPT-9500 Reference Manual
3.1 General
When the 9500 terminal is fully charged, you may remove it from the cradle. Then turn on
the terminal and wait for the Today screen to come up.
However, if you are using the terminal for the first time, there are a couple of things to do
before the Today screen comes up.
 To select your time zone and set the local time
 To align the touch screen
Note: With a focus on delivering data collection and industrial requirements on a portable
device, the 9500 terminal is currently not equipped with an internal microphone and
the IrDA port. Therefore, voice recording and file transfer via infrared (Start >
Settings > Connections tab > Beam) are not supported.
3.1.1 Turn On/Off
Like your PDA, Pocket PC and most handheld devices, the 9500 terminal functions when it
is turned on. This is because the Windows Mobile operating system eliminates the booting
process and runs continuously.
Turn On
To turn on the terminal, simply press the [Power] key.
Turn Off
To turn off the terminal, press and hold the [Power] key for approximately 2
seconds. The system is now ready for use but not in use. This is referred to as
Suspend mode or Standby mode. It means the system is in power-saving status and
waiting for user interference.
Warning: To save battery power, it is suggested that the terminal is set to
automatically turn off when not in use.