User's Manual

Chapter 2 ᙑᎄ! ࡸآࡳᆠᑌڤΖ 31
2.4 Cradle
The cradle is designed for charging and communications at the same time.
1. Place the cradle in a flat and clean surface.
2. Connect the line of the power adaptor to the power jack on the back of the cradle.
3. Connect the power adaptor to a suitable power outlet.
4. The cradle is ready for charging the terminal (loaded with main battery) and one spare
battery pack.
Seat the terminal and/or the spare battery pack then.
5. If data communications are desired at the same time, a USB connection must be
established as well.
Connect the USB cable from the back of the cradle to a computer.
Note: Make sure the connection is made secured.
2.4.1 Status Indicators
Figure 7: Cradle LEDs