User's Manual

18 CPT-9500 Reference Manual
1.3.5 LCD
The terminal comes with a 3.5” TFT graphic LCD, 240 by 320 pixels resolutions. The LED
backlight of screen, which helps ease reading under dim environments, can be controlled
manually and automatically.
Warning: Using backlight while on battery power will substantially reduce battery
life. It is suggested to dim the backlight while working in a well-lit area or
automatically turn off the terminal when not in use.
This LCD is also a touch screen that can be calibrated through screen alignment.
Warning: DO NOT use any pointed or sharp objects to move against the surface of
the screen.
LCD Settings
+
 The LED backlight of screen is turned on by default. It can be manually controlled by using the
key combination: [Func] + [TAB].
Start > Settings > System tab > Backlight
 Configure the LED backlight of screen. The backlight can be toggled on and off automatically,
either on battery or AC power.
 To conserve more power, you may go to Start > Settings > System tab > Power to configure the
auto turn-off setting.
Start > Settings > System tab > Backlight Control
 To configure the luminosity of backlight, tap, hold, and drag the slider.
 You may select to auto adjust backlight by the battery's capacity.
Start > Settings > System tab > Screen > Alignment tab
 Tap [Align Screen] to start with screen alignment if necessary.
Start > Settings > System tab > Screen > Clear Type tab
 You may select Clear Type for fonts.
Start > Settings > System tab > Screen > Text Size tab
 Tap, hold, and drag the slider to configure text size.