User's Manual

Chapter 5 ᙑᎄ! ࡸآࡳᆠᑌڤΖ 71
5.2.2 Flight Mode
The power to the wireless module is controlled by Wireless Power Manager. This flight
mode setting is provided only when the wireless power is turned on through Wireless Power
Manager.
Turn on flight mode
When the flight mode is turned on, it immediately stops the use any wireless
connections, Bluetooth and Wi-Fi, which could possibly interfere with other
equipment especially when on an airplane or in a hospital. However, you will find
that the wireless power is still enabled (ticked) in Wireless Power Manager.
Tap the Connectivity button, and then tap Turn on flight mode. Wireless signals will
be stopped temporarily and can be recovered later by tapping Turn off flight mode.
It results in the same behavior as you go to Start > Settings > System tab > Power >
Wireless tab, and tap Wireless signals off (Flight mode).