User's Manual

Chapter 5 ᙑᎄ! ࡸآࡳᆠᑌڤΖ 67
5.1.2 Configure Reader Settings
Tap the barcode button, and then select BC Reader or RFID Reader. If it is ticked, the reader
is enabled. Otherwise, it is disabled.
The default reader is BC Reader for reading barcodes. If the RFID Reader is installed, the
option will be available. If you need to change the factory settings, tap the barcode button,
and then select Settings.
General tab > Active Device
The scan engine can be identified here.
 1D Reader, or 1D Long Range Laser, or 2D
 RFID