User's Manual

45
Appendix III 2D Scan Engine
0 Modulo 10 check digit verified and transmitted. MSI
1 Modulo 10 check digit verified but not transmitted.
Discrete 25 0 Always transmit 0.
0 Standard data packet in full EAN country code format, which
is 13 digits for UPC-A and UPC-E (not including
supplemental data).
3 Standard data packet with two-digit or five-digit
supplemental data.
4 EAN-8 data packet.
UPC/EAN
A UPC-A with Addon 2 barcode, 012345678905-10, is transmitted to the host
as a 18-character string, ]E3001234567890510.
Bookland EAN 0 Always transmit 0.
Trioptic Code 39 0 Always transmit 0.
0 Single check digit (has been verified.)
1 Two check digits (has been verified.)
Code 11
3 Checksum has been verified but not transmitted.
0 Always transmit 0. RSS Family
RSS-14 and RSS Limited will be transmitted with an Application Identifier
“01”. For example, an RSS-14 barcode, 100123456788902, is transmitted
as ]e001100123456788902.
Note: In UCC/EAN-128 emulation mode, RSS is transmitted using Code 128 rules (i.e.
“]C1”).
Native mode transmission
0 Standard data packet
1 Data packet containing the data following an encoded
symbol separator character.
2 Data packet containing the data following an escape
mechanism character. The data packet does not support the
ECI protocol.
3 Data packet containing the data following an escape
mechanism character. The data packet supports the ECI
protocol.
UCC/EAN-128 emulation
EAN.UCC
Composites (RSS,
UCC/EAN-128, 2D
portion of UPC
composite)
1 Data packet is a UCC/EAN-128 barcode (i.e. data is
preceded with “]JC1”).
Note: UPC portion of composite is transmitted using UPC rules.
PDF417,
Micro PDF417
0 Scan engine is set to conform to protocol defined in 1994
PDF417 symbology specifications.
 When this option is transmitted, the receiver cannot
reliably determine whether ECIs have been invoked or
whether data byte 92DEC has been doubled in