User's Manual
Table Of Contents
43
Appendix III 2D Scan Engine
Optimized for JPEG
Quality
Decide whether JPEG images are optimized for quality.
Cancel the check box so that JPEG images are
optimized for size.
Enable
Select JPEG Quality Set a value from 5 to 100, where “100” represents the
highest quality image.
65
Select JPEG Size Set a value from 5 to 150, which represents the file size in
multiples of 1024 bytes (1K). For example, setting this
value to 8 permits the file size to be as large as 8192
bytes.
40
Bits per Pixel Select the number of significant bits per pixel (BPP) to use
when capturing an image.
1 bit per pixel (for black and white images)
4 BPP (to assign 1 of 16 levels of grey to each pixel)
8 BPP (to assign 1 of 256 levels of grey to each pixel)
8
Note: (1) For JPEG files, these BPP settings are ignored for it always uses 8 bits per pixel!
(2) When the image capture feature is enabled, press the [SCAN] button and it will
capture an image instead of reading a barcode.
Miscellaneous Options ---
Transmit Code ID Decide whether to include AIM Code ID in the beginning of
data. Each AIM Code ID contains the three-character string
“]cm” –
] = Flag Character (ASCII 93)
c = Code Character (see below)
m = Modifier Character (see below)
Disable