User's Manual

39
Appendix III 2D Scan Engine
Transmit Checksum Decide whether to include the UPC-E0 checksum in the
data being transmitted.
Yes
Transmit Preamble Decide whether to include the UPC-E0 preamble System
Number (and Country Code) in the data being transmitted.
System
Number
Addon 2 / Addon 5 Refer to UPC/EAN Addon setting.
Convert to UPC-A The UPC-E0 barcode will be expanded into UPC-A, and the
next processing will follow the settings configured for
UPC-A.
No
UPC-E1 Disable
Transmit Checksum Decide whether to include the UPC-E1 checksum in the
data being transmitted.
Yes
Transmit Preamble Decide whether to include the UPC-E1 preamble System
Number (and Country Code) in the data being transmitted.
System
Number
Addon 2 / Addon 5 Refer to UPC/EAN Addon setting.
Convert to UPC-A The UPC-E1 barcode will be expanded into UPC-A, and the
next processing will follow the settings configured for
UPC-A.
No
UCC Coupon Extended Code Disable
Read UPC-A barcodes starting with digit "5", EAN-13 barcodes starting with digits "99", and
UPC-A/EAN-128 Coupon Codes.
 UPC-A, EAN-13, and EAN-128 must be enabled first!
 Use “Addon Redundancy” to control auto-discrimination of the EAN-128 (right half) of a coupon
code.
UPC/EAN Addon ---
Addon 2 / Addon 5 Decide whether to decode EAN-8, EAN-13, UPC-E0,
UPC-E1, UPC-A with supplementals.
 Ignore Supplementals
 Decode Only With Supplementals
 Decode With Supplementals (= Auto-discriminate)
Ignore...
Addon Redundancy When "Decode with Supplementals" is applied, decide the
number of times of supplementary decoding the same
barcode that makes a valid reading.
10 times
Code 11 Enable
Verify Checksum Decide whether to verify the checksum. If the checksum is
incorrect, the barcode will not be accepted.
 No verification
 One Check Digit
 Two Check Digits
No
Transmit Checksum Decide whether to include the checksum in the data being
transmitted.
 "Verify Checksum" must be enabled so that the
checksum can be left out (= "Transmit Checksum"
disabled).
No