User's Manual

38
9300 Mobile Compute
r
Reference Manual
MSI Enable
Verify Checksum If Two Check Digits option is selected, an additional
verification is required to ensure integrity. Select one of
the algorithms below. If the checksum is incorrect, the
barcode will not be accepted.
Check Digit Algorithm
One Check Digit Single Modulo 10
Two Check Digits
 Mod 10/Mod 11
 Mod 10/Mod 10
Single Modulo
10
Transmit Checksum Decide whether to include the checksum in the data being
transmitted.
No
Select Length
 One or two fixed lengths
 Range (1~55)
4~55
RSS ---
RSS-14 Enable
RSS Limited Enable
RSS Expanded Enable
Convert RSS to
UPC/EAN
"Convert to UPC/EAN" only applies to RSS-14 and RSS
Limited barcodes not decoded as part of a Composite
barcode.
Convert to EAN-13
Strip the leading "010" from barcodes.
 "01" is the Application ID and must be followed by a
single zero (the first digit encoded)
Convert to UPC-A
Strip the leading "0100" from barcodes.
 "01" is the Application ID and must be followed by
two or more zeros (but not six zeros)
No
EAN-8 Enable
Convert to EAN-13 The EAN-8 barcode will be expanded into EAN-13, and the
next processing will follow the settings configured for
EAN-13.
No
Addon 2 / Addon 5 Refer to UPC/EAN Addon setting.
EAN-13 Enable
Bookland EAN (=
ISBN)
The EAN-13 barcode starting with 978 will be converted to
ISBN.
Yes
Addon 2 / Addon 5 Refer to UPC/EAN Addon setting.
UPC-A Enable
Transmit Checksum Decide whether to include the UPC-A checksum in the data
being transmitted.
Yes
Transmit Preamble Decide whether to include the UPC-A preamble System
Number (and Country Code) in the data being transmitted.
System
Number
Addon 2 / Addon 5 Refer to UPC/EAN Addon setting.
UPC-E0 Enable