User's Manual

ManualsBrandsCipherLab ManualsElectronicsTerminal

Table Of Contents

9300 Mobile Compute

Reference Manual

Barcode Types “Excluded” Code Length

Codabar 8 characters or less

MSI 4 characters or less

Discrete 25 (=Industrial 25) 8 characters or less

Interleaved 25 8 characters or less

Level 4 All barcodes must be successfully read three times before being decoded.

Security Level Select a decode security level appropriate for the barcode

quality when reading delta barcodes such as Code 128,

Code 93, UPC/EAN.

 Security Level 0 –

This default setting allows the scan

engine to operate in its most aggressive state,

providing sufficient security in decoding most “in-spec”

barcodes.

 Security Level 1 –

Select this option if misdecodes

occur. This level should eliminate most misdecodes.

 Security Level 2 –

Select this option if Security Level 1

fails to eliminate misdecodes.

 Security Level 3 –

Select this option if Security Level 2

also fails to eliminate misdecodes. However, selecting

this option impairs the decoding ability of the scan

engine. If this level of security is necessary, try to

improve the barcode quality.

Level 0

SYMBOLOGY SETTINGS TABLE

2D Description Default

Codabar Enable

CLSI Editing When applied, the CLSI editing strips the start/stop

characters and inserts a space after the first, fifth, and

tenth characters of a 14-character Codabar barcode.

 The 14-character barcode length does not include

start/stop characters.

NOTIS Editing Decide whether to include the start/stop characters in the

data being transmitted.

 NOTIS Editing is to strip the start/stop characters, i.e.

to disable "Transmit Start/Stop Characters".

Select Length

 One or two fixed lengths

 Range (1~55)

4~55

Code 128 ---

Code 128 Read standard Code 128 barcodes (=without leading FNC1

character).

Enable

UCC/EAN-128 Read UCC/EAN-128 barcodes with leading FNC1 character. Enable

ISBT 128 Read ISBT 128 barcodes. Enable