User's Manual

31
Appendix II CCD/Laser Scan Engine
Verify Checksum Decide whether to verify the checksum. If the checksum is
incorrect, the barcode will not be accepted.
No
Transmit Checksum Decide whether to include the checksum in the data being
transmitted.
Yes
Select Length
 One or two fixed lengths
 Range
4~127
Matrix 25 Enable
Start/Stop Selection Refer to Industrial 25. Matrix 25
Verify Checksum Decide whether to verify the checksum. If the checksum is
incorrect, the barcode will not be accepted.
No
Transmit Checksum Decide whether to include the checksum in the data being
transmitted.
Yes
Select Length
 One or two fixed lengths
 Range
4~127
French Pharmacode Disable
*Transmit Start/Stop
Character
Controlled by the same setting of Code 39. No
Transmit Checksum Decide whether to include the checksum in the data being
transmitted.
Yes
Italian Pharmacode (= Code 32) Disable
*Transmit Start/Stop
Character
Controlled by the same setting of Code 39. No
Transmit Checksum Decide whether to include the checksum in the data being
transmitted.
Yes
Code 39 Enable
Transmit Start/Stop
Character
Decide whether to include the start/stop characters "*" in
the data being transmitted.
No
Verify Checksum Decide whether to verify the checksum. If the checksum is
incorrect, the barcode will not be accepted.
No
Transmit Checksum Decide whether to include the checksum in the data being
transmitted.
Yes
Code 39 Full ASCII Code 39 Full ASCII includes all the alphanumeric and
special characters.
Disable
Code 93 Enable
MSI Disable
Verify Checksum Select one of the three calculation formulas to verify the
checksum. If the checksum is incorrect, the barcode will
not be accepted.
 Single Modulo 10
 Double Modulo 10
 Modulo 11 & 10
Single Modulo
10