User's Manual

Table Of Contents

Appendix I

SCAN ENGINE SETTINGS

The Reader Configuration Utility (93ReaderConfig.exe) allows configuring the

following reader types, depending on the module equipped on your mobile computer:

 1D CCD scan engine

 1D Laser scan engine

 2D scan engine

 RFID reader

Options of different reader combination are allowed, such as 1D+RFID and 2D+RFID. For

each combination, both readers can be initialized and ready for scanning at the same

time (dual mode operation). For example, if you press the [SCAN] button while running

the 93ReaderConfig utility on the mobile computer, it will read a barcode in position or an

RFID tag in proximity depending on which one comes first.

Note: (1) You cannot have 1D+2D scan engines installed on the mobile computer

because they are both barcode readers!

(2) You can run only one utility or application at a time to control the reader(s).

For example, while running 93ReaderConfig.exe, you should not run Application

Generator, STREAM Wireless Studio, MIRROR Browser, or any other application

that uses ReaderDLL.

SYMBOLOGIES SUPPORTED

Varying by the scan engine installed, the supported symbologies or tag types are listed

below. For details on configuring associated settings, please refer to each Appendix

separately.

CCD, Laser 2D

Codabar

9 9

Code 11

8 9

Code 93

9 9

Composite Code

8 9

MSI

9 9

Plessey

9 8

Postal Codes

8 9

Telepen

9 8

Code 128 Code 128

9 9

EAN-128

9 9